# What remains same on both sides of transformer?

Contents

## What remains same in a transformer?

A transformer changes Voltages and current but the power remains constant but that is case only for ideal transformer, in general there is loss in power in form of heat , sound , vibrations, eddy currents , etc . Only the frequency remains constant.

## Does power stay the same in Transformers?

A transformer transfers power from the primary coil to the secondary coil. Since the power must stay the same, if the voltage increases, the current must decrease. … That’s because it’s the change of the magnetic field created by the primary coil that induces voltage in the secondary coil.

## What remains constant in step up transformer?

Transformer operates on constant power and frequency. Power is kept constant in step up transformer by increasing the voltage and decreasing the current.

## Why do transformers have the same frequency?

It is clear that the frequency of output/induced voltage Vin is ω which is same as that of the input current. Hence, in a transformer, the frequency remains unchanged (constant) as flux changes.

## Why power is same on both sides of transformer?

A transformer cannot generate power out of thin air and so the power on both sides is (roughly) the same. That means if the voltage on the secondary side is higher then the secondary current is actually lower than the primary.

THIS IS IMPORTANT:  Quick Answer: Which type of AC single phase motor is used in washing machine?

## Can a transformer work both ways?

Yes you can use a transformer in reverse. The no part has to do with the transformer’s design. Secondary or output windings are low impedance to reduce losses and increase efficiency. … You would need a transformer designed to step up 415V to 11kV.

## What quantity value is the same on both the primary and secondary sides of a transformer?

This works out to be the same ratio we found between primary and secondary voltages and currents (10:1), so we can say as a rule that the voltage and current transformation ratio is equal to the ratio of winding turns between primary and secondary. Step-down transformer: (many turns :few turns).

## What are the two types of transformer depending upon the position of the primary and secondary coils on the core?

Depends upon the voltage ratios from primary to secondary windings, the transformers are classified as step-up and step-down transformers.